BYD ATTO 3 Interior & Equipment Latest Topics

BYD ATTO 3: opening the panoramic camera and choosing a view

Wed, 04 Nov 2026 10:30:57 +0000

On an ATTO 3 equipped with panoramic view, open Vehicle View on the touchscreen or use the steering-wheel camera button shown in the manual. Selecting reverse also brings up the camera system.

In landscape mode, tap the front, rear or side icon to choose a view. In the single front or rear view, double-tapping opens a wider perspective. Use mirrors and direct observation as well. The wide-angle image can distort distances and the underbody view can initially show an older image.

BYDbase editorial guide. This guide follows the Middle East & Africa manual. Check the edition and equipment for your own vehicle.

Source: BYD ATTO 3 Owner’s Manual (EN), Panoramic View System, printed pp. 125–126 (PDF pp. 125–126). The download requires a forum sign-in.

Landscape panoramic camera view shown in the ATTO 3 owner’s manual. Illustration from the BYD owner’s manual, printed p. 125 (PDF p. 125).

BYD ATTO 3: changing the automatic side-mirror folding setting

Wed, 04 Nov 2026 10:30:56 +0000

The manual shows the automatic folding setting under Vehicle → Comfort Driving → Side Mirror → Auto-fold. Use this setting when you want to change how the mirrors behave as you park.

There is also a physical fold button on the driver’s door. Pressing it again returns the mirrors to their previous position. If the mirrors are frozen, BYD advises against operating the switch or scraping them. Allow them to thaw before testing the setting.

BYDbase editorial guide. This guide follows the Middle East & Africa manual. Check the edition and equipment for your own vehicle.

Source: BYD ATTO 3 Owner’s Manual (EN), Power Side Mirrors, printed p. 135 (PDF p. 135). The download requires a forum sign-in.

ATTO 3 driver-door controls for selecting and folding the side mirrors. Illustration from the BYD owner’s manual, printed p. 135 (PDF p. 135).

BYD ATTO 3: when the rear wiper starts in reverse or stops at the tailgate

Wed, 04 Nov 2026 10:09:43 +0000

If the rear wiper runs as you select reverse, check whether the front wipers are already operating. In the ATTO 3 described here, selecting R with the front wipers running activates the rear wiper automatically.

With the car powered on, the rear wiper and washer are inhibited when the tailgate is open. If the rear wiper was running when you opened it, the manual describes a five-second delay after closing the tailgate before wiping resumes.

When describing unexpected behaviour, note the front wiper setting, whether reverse was selected and whether the tailgate was fully closed. Those three details help distinguish the normal triggers from a fault.

BYDbase editorial guide. This guide follows the Middle East & Africa manual. Check the edition and equipment for your own vehicle.

Source: BYD ATTO 3 Owner’s Manual (EN), Rear Windshield Wipers and Washer; Link between rear wiper and trunk, printed pp. 67–68 (PDF pp. 67–68). The download requires a forum sign-in.

BYD ATTO 3 rear window wiper selector at the end of the stalk. Illustration from the BYD owner’s manual, printed p. 67 (PDF p. 67).